Audiodesksysteme Glass Vinyl Cleaner PRO Betriebsanleitung - Seite 13
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Ultraschall-Schmuckreiniger Audiodesksysteme Glass Vinyl Cleaner PRO herunter. Audiodesksysteme Glass Vinyl Cleaner PRO 14 Seiten.
Auch für Audiodesksysteme Glass Vinyl Cleaner PRO: Betriebsanleitung (13 seiten)
Seite drucken
13
Changing the driving rings
CAUTION !
Unplug the mains plug from the power socket before changing the driving rings.
Always be careful when you reach inside the device to avoid abrasions or injuries
The driving rings are subject to regular wear and tear.
If the record is not rotating properly anymore or jerks, the driving rings must be replaced.
Inspection interval: after approx. 500 cleaning cycles.
Driving rings
1
14
Equipment
1
2
1.
Remove the microfiber cleaning barrels
(see section 10).
2.
Remove the old driving rings (1) by pulling
them over the drive rollers using your fingertips.
3.
Place the new driving rings on the drive rollers
from above and push them down until they
click into the retainers.
4.
Check that they fit correctly.
5.
Put the cleaning barrels back on.
1.
Concentrated cleaning liquid
2.
Wet filter
3.
Microfiber cleaning barrels (set of 4)
4.
Driving rings (set of 2)
5.
Water wipers (set of 2)
3
6.
Ventilator covers (set of 2)
4
5
6
.
V 1.0/2016 Page 13 of 14