Duplo 486P Betriebshandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Paper Cutters Duplo 486P herunter. Duplo 486P 18 Seiten.
Seite drucken
8. Cutting Procedure
8.1 Manual Cut
8.1.1 Press
8.1.2 Press
8.1.3 Enter the sheet length
8.1.4 Press
manual switch clockwise to the desire length
8.1.5 Load the sheet, against backgauge and the left margin. Using the registration block to make
sure the sheet pile is squared.
8.1.6 Press 2-hand switch until the sheet pile is fully cut
8.2 Repeating Cut
This feature allow user to do repeating cut on same sheet. For example, a 21" sheet cut into 3.5"
8.2.1 Press
8.2.2 Enter the paper length
8.2.3 Press
8.2.2 Enter 3.5" into system then
8.2.3 Press
end of the sheet
8.2.4 For doing 2
8.3 Push-out After Cut
This feature can be set to push the sheet out from cutting line after being cut
8.3.1 Push-out enables
◎ Press
to push-out if necessary
to bring the backgauge to the desire length as per the setting, or rotate the
to set backgauge to home position
to do repeating cut, backgauge will move 3.5" automatically after each cut until
nd
batch repeating cut, repeat 7.2.1 to 7.2.3
12