Daniamant Dan MR3 Installations- und Wartungsanweisungen - Seite 3
Blättern Sie online oder laden Sie pdf Installations- und Wartungsanweisungen für Sicherheitssystem Daniamant Dan MR3 herunter. Daniamant Dan MR3 4 Seiten. Lifejacket light
Seite druckenOperation
The DAN MR3 is switched on by pressing the on/off button for *one second and
can be deactivated by pressing* the button again.
Maintenance
Routine service
Dan MR3 is maintenance free, but the following checks must be made annually:
1. Inspect the light for signs of damage or corrosion.
2. Press the on/off button for one second and the light will commence
flashing, then press the button* once more and the light should
deactivate.
Replacement
The Dan MR3 lifejacket lights have a storage life of 5 years and must be replaced
by the date shown on the label.
Health and safety information
Dan MR3 lights contain Lithium cells. These must be handled correctly:
•
Do not dismantle the light assembly
•
Do not make any external electrical connection
•
Do not recharge
•
Do not incinerate
Store between -30°C and +65°C
ON/OFF
Button
Figure depicts the manual 'ON/OFF button'.
3