Audiolab M-ONE Gebrauchsanweisung - Seite 9
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Verstärken Audiolab M-ONE herunter. Audiolab M-ONE 13 Seiten.
Seite drucken
8; !Uif!Nfov
The menu enables you to customize the unit and optimize the interface with other equipment in your system.
M-ONE has 13 different menu pages. Press the MENU key on the remote control to enter menu mode, and then press
menu page, press
or
again to select different settings, press
enter the menu mode, rotating this knob turns through the menu pages; press the SEL knob again to enter any menu page and rotate the knob to change the setting, press the SEL knob
again to select a setting. No operation for 5 seconds will also exit menu mode automatically. The setting will not take effect if
The Menu Tree
The chart shows the menu options. The default settings are at the top.
Digital Filter
DSD Bandwidth
Display Brightness
Sharp Rolloff
Normal
High
Show If Available
Digital Filter
DSD Bandwidth
Display Brightness
Slow Rolloff
50k
Low
Digital Filter
DSD Bandwidth
Display Brightness
Minimum Phase
60k
Off
DSD Bandwidth
70k
again to confirm the chosen setting and exit the menu mode. Pressing the SEL knob on the front panel can also
Track & Time
Sampling Rate
Jitter Rejection
Default Input
Nominal Frequency
Automatic
Recall Last Input
Track & Time
Sampling Rate
Jitter Rejection
Default Input
Do Not Show
Actual Frequency
Low Bandwidth
COAX
Jitter Rejection
Default Input
Medium Bandwidth
OPT
Jitter Rejection
Default Input
High Bandwidth
PC USB
Default Input
BT
Default Input
USB A
Default Input
AUX 1
Default Input
AUX 2
or
to turn to different menu pages, press
or the SEL knob is not pressed.
Trigger A Control
Trigger B Control
Balance
Output Level
Enable
Enable
L
0.0dB
R
Adjustable
Trigger A Control
Trigger B Control
Balance
Output Level
Disable
Disable
3.5dB
R
0dBr (2.2 Vrms)
Trigger B Control
Balance
Output Level
Follow Trigger A
L
4.5dB
+3dBr (3.1 Vrms)
Page 8
to enter any
Auto Standby
Factory Reset
Software Version
Never
No
Ver:0.0013
Auto Standby
Factory Reset
20 Minutes
Reset