Brainworx Ampeg SVT-VR Classic Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken Brainworx Ampeg SVT-VR Classic herunter. Brainworx Ampeg SVT-VR Classic 10 Seiten.

FX Rack

Input Gain

If you want to drive the input of the Ampeg preamp harder or softer you

may adjust the input gain to your liking. Some single coil pickups from

older or vintage basses may deliver low level output that can be compen-

sated with the Input Gain.

The opposite goes for a lot of heavy metal style humbuckers. If you have

recorded the DI signal too hot or if you are using other plug-ins before

entering the Ampeg amp plug-in you may want to dim the input signal.

With most standard bass guitars you can and should leave the Input Gain

at 0 (zero) though.

Internal Power Soak

In the real world, power soaks are being used to reduce the volume of a

bass power amp. This way you can crank up a (tube) power amp to drive it

until it starts clipping, and still record at a volume which will protect your

hearing and keep the neighbors friendly.

Ampeg SVT-VR Classic

Plug-in Manual

A clipping tube power amp adds distortion and harmonics to the bass

amp signal. A fully cranked up tube amp tamed in volume with a power

soak will sound different than the same amp with the master volume

turned down.

We have modeled the behavior of the Ampeg power amp, so you may

experiment with different settings of the Master Volume of the amp and

the internal Power Soak. We recommend a setting of roughly -10dB for

most scenarios.

Rec Chains

Simply select a speaker and a complete studio setup by browsing through

the Rec Chains pull-down menu!

01 8x10 563

Cabinet: Ampeg SVT 810E 800W 8x Eminence Speakers

Microphone: Neumann CMV 563

02 4x10 + 1x15 563 + BLUE

Cabinet: SVT 410HLF 500W 4x Custom Designed Speakers + SVT 15E