AUDIOLINE MILLENNIUM Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Telefon AUDIOLINE MILLENNIUM herunter. AUDIOLINE MILLENNIUM 5 Seiten.

Seite drucken
CONNECTING
#
Connect the line cord to the wall socket and the underside of the telephone.
#
Connect the handset curly cord to the left hand side of the telephone.
#
Lift the handset and check for dial tone.
TO CALL
# Lift the handset and wait for dial tone.
# Dial the phone number.
# Finish the call by replacing the handset.

ADJUSTABLE RINGER

This telephone has programmable ringer selection. You can select between three
levels of three types of ring signal plus ringer off.
P Ensure the switch on the underside of the telephone is set to
P Lift the handset (ignore network tones) and press the redial
P Press
[#]
key.
P Select ring signal by pressing 0 - 9 according to the table below.
P Press redial
P Replace the handset, the ring signal is now selected.
P Set the switch on the bottom to
Key/setting
1
2
3
4
5
6 (default setting)
7
8
9
0
* If setting 0 is selected, the ring signal will be turned off until the handset is lifted
again. After that, the ring signal reverts to the previous setting.
NOTE:
The normal ringer is an internal electronic ring. The two external bells will
only ring when you turn the handle.
button again.
Melody type
Melody A
Melody A
Melody A
Melody B
Melody B
Melody B
Melody C
Melody C
Melody C
Off *
Telephone.
Ringer level
Low
Normal
High
Low
Normal
High
Low
Normal
High
-
1
Programming.
button.