AUDIOLINE TEL5 clip Betriebsanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Telefon AUDIOLINE TEL5 clip herunter. AUDIOLINE TEL5 clip 16 Seiten.

Seite drucken

telephone base (see Chapter 2, Section entitled Underside

of base unit, Item 2.). Then feed the cable out of the

telephone housing through the cable guide either towards

the top or the bottom. Secure the cable firmly in the cable

duct. The telephone works using the MF system (Tone

Dialling).

3.6

Wall mounting

Your telephone is also suitable for wall mounting. Use two

screws for fixing to the wall. Drill two holes 85 mm apart,

vertically one above the other, and leave the screws

protruding 5 mm from the wall. Now place the telephone

base over the screws and push down slightly.

When the telephone is mounted on a wall, you can hang the

receiver on the telephone without cutting off the call. A small

hook is located at the top of the receiver rest for this

purpose.

3.7

Adjust date and time

1. Press the button y for 4 seconds.

2. Press the y or z button to set the contrast in

the LC display.

3. Confirm with the C button.

4. Press the y or z button to set the Recall

time (100 ms or 300 ms).

5. Confirm with the C button.

6. Enter the current hour by repeatedly pressing the

y or z buttons.

7. Confirm with the C button. The display jumps to

the minutes display.

8. Enter the current minutes by repeatedly pressing

the y or z buttons.

9. Confirm with the C button. The cursor jumps to

the day display.

10. Enter the current day by repeatedly pressing the

y or z buttons.

11. Confirm with the C button. The cursor jumps to

the month display.

12. Enter the current month by repeatedly pressing

the y or z buttons.

13. Confirm with the C button. This completes the

entries and the current data will now be shown in

the display.

Note:

If the batteries are fully discharged, the time and

date must be re−entered.

− Setting up −