3Ware 9690SA Series Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Software 3Ware 9690SA Series herunter. 3Ware 9690SA Series 11 Seiten. Remote battery board
Auch für 3Ware 9690SA Series: Installationshandbuch (4 seiten)

Seite drucken

Installing the Driver and Software from the

Command Line

www.3ware.com

The following steps describe how to install software on OpenSolaris at a

command line, using a console application. You must be root to run the

installer.

To install the driver and software on OpenSolaris from the

command line

Download the AMCC 3ware OpenSolaris installation image from

http://3ware.com/support/index.asp

CD-ROM disc.

Navigate to the folder on the mounted image or CD that contains the

installer.

packages/installers/tools/solaris/opensolaris

Type:

./setupSolaris_x86.bin -console

and press

Enter

The application starts in text mode.

Respond to each screen as it walks you through the installation process.

The Console installation screens mirror those that display using the GUI

installer. For specific information about the screens, see the previous

section in this document.

To navigate in text mode, type:

1 for Next

2 for Previous

3 to Cancel

5 to Redisplay

0 to Continue Installing

After the installation is complete, check that the driver has loaded

correctly.

# modinfo | grep 3ware

Tip:

If you installed it, you can now access the documentation through the 3ware

HTML Bookshelf. Open your browser and enter /opt/AMCC/Documentation/

index.html

Driver and Software Installation

and mount the image or burn it to a