Danish Interpretation Systems PS 6000 Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Stromversorgung Danish Interpretation Systems PS 6000 herunter. Danish Interpretation Systems PS 6000 14 Seiten. Digital conference system dcs 6000 power supply

Seite drucken

Danish Interpretation Systems

Important

Compliancy

The equipment has been tested and found to comply

with the limits of the following standards for digital

devices:

EN55103-1 (Emission)

EN55103-2 (Immunity

EN60065 safety

UL6500 safety

FCC rules part 15, class A (Emission)

This device complies with part 15 of the FCC rules.

Operation is subject to the following conditions: (1)

This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired

operation.

These limits are designed to provide reasonable

protection against harmful interference when the

equipment is operated in residential, commercial or

light industrial environments. The equipment

generates, uses, and can radiate radio frequency

energy and if not installed and used in accordance

with the user manual it may cause harmful

interference to radio communications.

You

are

cautioned

modifications not expressly approved in this manual

could void your authority to operate this equipment.

Safety

Check that the voltage of your local power supply is

within the operating voltage of the unit (100-240V

AC). If a voltage conversion is required, consult

your DIS dealer or qualified personnel.

Should any liquid or solid object fall into the

cabinet, unplug the unit and have it checked by

qualified personnel before operating it further.

Set the Power switch to OFF if it is not used for

several days.

that

any

changes

Manual 01 18 04450

The equipment must be connected to earth

Installation precautions

Allow adequate air circulation to prevent internal

heat built-up. Do not place the unit on a surface

(rugs, blankets, etc.) that may block the ventilation

holes.

Do not install the unit in a location near heat

sources such as radiators or air ducts, or in a place

exposed to direct sunlight, excessive dust or

humidity, mechanical vibration or shock.

To avoid moisture condensations do not install the

unit where the temperature may rise rapidly.

When installing the unit inside a 19" rack, observe

that the rack is properly ventilated. The maximum

allowed temperature inside the rack is 40 C.

Cleaning & Repacking

To keep the cabinet in its original condition,

periodically clean it with a soft cloth. Stubborn

stains may be removed with a cloth lightly

dampened with a mild detergent solution. Never use

organic solvents such as thinners or abrasive

cleaners since these will damage the cabinet.

Save the original shipping cardboard box and

packing material; they will become handy if you

ever have to ship the unit. For maximum protection,

re-pack the unit as originally packed from the

factory.

Warranty

The unit is minimum covered by 12 months

warranty against defects in materials or work-

manship.

User Manual