Addonics Technologies AE25SNSP Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung Addonics Technologies AE25SNSP herunter. Addonics Technologies AE25SNSP 2 Seiten. 2.5" snap-in sp

Seite drucken

To power supply

in your system

SATA Power Cable

SATA Data Cable

LED Cable

Installing the 2.5" Snap-In SP

Screw the device into the 3.5" drive bay of your computer. After unit is screwed

in, attach the SATA power cable that comes with the unit and the SATA data cable

into the device's connectors as shown above. Connect the LED cable to the 4 pin

LED port on the back of the device. Attach the other end of the cables to your

computer or host controller.

Front View

Opening device and inserting HD

By default the lock should be set to the open (up) position. Pull the lever to open

up the device and slide in the 2.5" HD right side up.

After inserting your HD to the device, close the cover. Lock the cover with the

included key by turning it clockwise all the way.

Removing the HD

Make sure that there is no HD activity before unlocking the cover. Pull the lever

and carefully pull out the HD.

Note: The HD can reach temperatures exceeding 50°C. Handle with care to

prevent accidental burning.

Back View

To SATA port

in your system

Screws

4 Pin LED Port

SATA Data Connector

SATA Power Connector

Lever

Lock