Audiomedia AMD 808BT Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Empfänger Audiomedia AMD 808BT herunter. Audiomedia AMD 808BT 20 Seiten. Bluetooth cd/mp3 player with radio am/fm rds usb-sd/mmc built in

Seite drucken
Audiomedia AMD 808BT Benutzerhandbuch

DIN REAR-MOUNT (METHOD B)

Installation using the screw holes on the sides of the unit.
Fastening the unit to the factory radio mounting bracket.
5
3
2
5

2. DETACHABLE CONTROL PANEL (D.C.P .)

Removing The Detachable Control Panel (D.C.P .).
PANEL RELEASE
BUTTON
Attaching the DCP
2
A
B
CAUTION
DO NOT insert the D.C.P from the left side. Doing so may damage it.
The D.C.P can easily be damaged by shocks. After removing it, place it in a protective case and
be careful not to drop it or subject it to strong shocks.
When the release button is pressed and the D.C.P is unlocked, the car's vibrations may cause it
to fall. To prevent damage to the D.C.P , always store it in a protective case after detaching it.
The rear connector that connects the main unit and the D.C.P is an extremely important part.
Be careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Socket
1. Select a position where the screw holes of the
bracket and the screw holes of the main unit
become aligned (are fitted) and tighten the
screws at 2 places on each side.
2
2. Screw
4
3. Factory radio mounting bracket.
4. Dashboard or Console
5. Hook (Remove this part)
Note: the mounting box, outer trim ring, and half-
sleeve are not used for method B installation.
1. Turn the power off
2. Press the D.C.P. release button
3. Remove the D.C.P.
1. Attach the panel at the right side first, with point B
on the main unit touching point A on the D.C.P . (As
shown on the digram).
2. Then press the left side of D.C.P . onto the main unit
until a "click" sound is heard.
Note:
If the D.C.P is dirty, wipe off the dirt with soft, dry
cloth only. And use a cotton swab soaked in
isopropyl alcohol to clean the socket on the back
of the D.C.P .
IMPORTANT
These 2 screws are used to prevent damage to the CD
mechanism during transportation Please make sure to
remove the 2 screws before installing the unit into the
vehicle. DO NOT insert a CD into the unit before removing
the 2 screws.
GB - 4