Audiophonics DA-S125NC Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Audiophonics DA-S125NC herunter. Audiophonics DA-S125NC 14 Seiten.

Seite drucken

Settings

To enter the unit's configuration screen, press the Select button (17) on the remote control. Five settings appear on the screen (4). Use the Up (18) and Down (22)

navigation buttons on the remote control to select a setting. Press the Enter Button (19) on the remote control to enter the selected setting.

1. Max output level

This parameter allows to change the gain attenuation level of the amplifier and the DAC. The following settings are available :

1. 0dB (default)

2� ‑6dB

3� ‑12dB

4� ‑18dB

Note: The volume display on the screen does not reflect the use of this setting.

Example: If you select a gain attenuation level of -6dB and set the volume level to -30dB on the display, then the actual attenuation level is -36dB.

2. PCM filter

This parameter allows you to select a digital PCM filter to adjust the sound of the device. Four filters are available:

1. Apodizing Fast (default)

2. Fast linear

3. Slow linear

4. Fast minimum

Apodizing Fast (dB)

Fast Linear (dB)

Slow Linear (dB)

Fast Minimum (dB)