audiophony COV-SPRINT Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner audiophony COV-SPRINT herunter. audiophony COV-SPRINT 17 Seiten.

SPRINTER - 120W BATTERY-OPERATED MODULAR SOUND SYSTEM

5-6-2 : Bluetooth

pairing

Make sure the player is in Bluetooth® mode before pairing by pressing the MODE button. The display should

indicate BLUE ﬂ ashing. Turn on your Bluetooth source and search for devices.

Select BLUE from the list and connect it.

If necessary the password is 0000.

Once connected, the display shows BLUE permanently.

You can now start playback, pause, NEXT and PREV from the player or remote control.

5-6-3 : Replacing the battery

1 - Unlock the battery access hatch as shown in the ﬁ rst ﬁ gure.

2 - Place the new CR2025 - 3V battery type in the holder with the + terminal facing up as shown in the second ﬁ gure.

3 - Close the battery access cover as shown in the last ﬁ gure.

5-7 : Description of the USB player (USB-RUN)

D5 D3

NOTE: If your USB device contains several folders, the USB-RUN does not make any difference

between the folders and will read all of them (depending on the Repeat mode chosen -D3).

D1 - Volume control fader: From OFF to maximum (clockwise).

D2 - Stop button: Stops the playback and goes back to the beginning

of the track.

D3 - EQ/Repeat Button:

- Allows you to choose one of the 7 preset equalization modes:

NORMAL/POP/ROCK/JAZZ/CLASSICAL/COUNTRY.

- Press and hold for 3 seconds to choose one of the 3 preset repeat

modes: OFF/SINGLE/ONE/FOLDER ALL/RANDOM.

D4 -

Button: Stops or resumes the track.

D5 -

Button: Skips to the next track.

D6 -

Button: Goes back to the previous track.

D7 - USB port: Connect your USB support (key, HDD...) here.

English

Page 9