audiophony CP2 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte audiophony CP2 herunter. audiophony CP2 12 Seiten. Stereo compressor/limiter/gate

Seite drucken

CP2 - Stereo Compressor/Limiter/Gate

6 - Connections description

- Back pannel

[1] - Jack and XLR inputs

These sockets receive balanced and unbalanced

incoming signals.

- XLR : pin1 = ground ; pin2 = positive signal ; pin3 =

negative signal

- Jack : (in parallel with the XLR sockets) - tip =

positive signal; ring = negative signal ; body = ground

The input impedance is above 40K.

[2] - Jack and XLR outputs

These sockets carry the outgoing treated signal and are

compatible with balanced and unbalanced signals. They

are wired as described above.

[3] - Output mode

Allows you to select an output mode: +4 dBu or -10

dBv.

[4] - Side chain insert

This connector is used to add one or several devices

to the sound processing chain. This function does

not have the same effect as the one used by effect

processors to create a new loop to insert mixing desks

effects. You can for instance connect here an equalizer

which will define precisey the frequency range onto

which the CP2 will act.

Use a Jack 6.35 stereo as follows:

Connect the "outgoing" signal to the tip, the signal

"coming back" to the ring, while the chassis will be

connected to the ground.

[5] - Main power socket

Compliant with the current European standards. A cable

is supplied with the unit.

Before connecting the CP2 to an electrical outlet, please

verify the outlet voltage matches the voltage selected at

the rear of the CP2.

Fuse: If need to replace the fuse, please use a fuse with

the exact same characteristics as the old one.

ENGLISH

Page 9