audiophony X312 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte audiophony X312 herunter. audiophony X312 8 Seiten. 2-way stereo or 3-way mono active filter

Seite drucken

X312 - 2-way stereo or 3-way mono active filter

5.2 - 3-way Mono mode:

[1] - Power switch

Turns the unit ON/OFF.

[2] - SUB FREQ button

Allows you to configure the cutoff frequency of the SUB

output.

[3] - WOOFER GAIN knob

Allows you to configure the volume of the SUB output.

[4] - INPUT GAIN knob

Allows you to adjust the volume of each channel by

+/-12dB

LOW CUT button

[6] -

Applies a 40 Hz low frequency filter.

[5] - LOWCUT LED indicator

Lights up when the LOWCUT function is activated.

[7] - LOW/MIDDLE knob

Allows you to configure the bass/medium cutoff

frequency.

[8] & [9]- x10 Multiplier

Multiplies by 10 the frequencies operated by the fader.

The frequency range then becomes 450-9600 Hz. A

LED indicator lights up when this function is activated.

[10] - LOW OUT knobs

Allows you to control the bass output: +/-12 dB

[12] -

INV button

Allows you to invert the phase of the bass/medium

output.

[11] - INV LED

Lights up when the INV function is activated.

[13] - HIGH OUT knob

Deactivated in mono mode.

[15]- INV button

Deactivated in mono mode.

[14] - INV LED

Deactivated in mono mode.

[17] - LOW SUM button

Activates the addition of low frequencies. Once

activated, the low frequencies of both inputs are added

up and sent as mono signals to both channels. In doing

so, it allows you to use only one channel for basses.

[24] - MID/HIGH knob

Allows you to configure the medium/treble cutoff

frequency.

[25] & [26]- x10 Multiplier

Multiplies by 10 the frequencies operated by the fader.

The frequency range then becomes 450-9600 Hz. A

LED indicator lights up when this function is activated.

[27] - MID OUT knob

Allows you to control the medium output: +/-12 dB

[29] - INV button

Allows you to invert the phase of the bass/medium

output.

[28] - INV LED

Lights up when the INV function is activated.

[30] - HIGH OUT knob

Allows you to control the treble output: +/-12 dB

[32] - INV button

Allows you to invert the phase of the treble outputs.

[31] - INV button

Allows you to invert the phase of the treble outputs.

ENGLISH

Page 5