Audiophony PA H11396 Präsentation - Seite 4

Blättern Sie online oder laden Sie pdf Präsentation für Aufnahmegeräte Audiophony PA H11396 herunter. Audiophony PA H11396 13 Seiten.

English

6 - STATUS

FAULT : Red LED indicating a DSP malfunction. The information is relayed on the display.

COMM : Green LED indicating the communication status between the PC and the device. The LED

flashes during data transfer. It remains off if there is a problem.

POWER : Blue LED indicating that the unit is powered on.

3 - 2 - BACK PANEL

1 - Power supply input

The input voltage may vary from 100 V to 240 VAC, 50-60 Hz.

If you have to replace the fuse, replace it with a fuse of the same value.

2 - Compartment for the optional extension

3 - LAN

Port for Ethernet connection, 10/100M adaptive, with DHCP function.

4 & 5 - GPI

This function is used to control the input / output priority / mute all outputs of channels 1-8.

6 - ON <> OFF

Enables or disables the Ethernet port.

7 & 8 - RD 9/10, 11/12

RD port for connecting a remote control accessory such as DZ-BOX22, DZ-CTL, DZ-CTL2OUT, DZ-

EXPAND and DZ-MICDESK.

This port transmits and receives AES3 digital audio and control data.

9 - RELAY

Dry contacts whose ON/OFF status can be individually controlled in the System menu. They are usually

used as switches for third party electrical equipment.

Attention: 24V DC, control current : Less than 500 mA.

10 - RS232

This interface is used to remotely control the parameters of the DZ-MATRIX, such as changing a preset or

changing the gain of a channel.

11 - INPUT

Euroblock connector with 8 balanced analog inputs.

12 - OUTPUT

Euroblock connector with 8 balanced analog outputs.

Page 4

DZ-MATRIX - Digital matrix