Consonance Droplet LP5.0 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drehscheibe Consonance Droplet LP5.0 herunter. Consonance Droplet LP5.0 7 Seiten.
Auch für Consonance Droplet LP5.0: Benutzerhandbuch (7 seiten)
Seite drucken
5. If it's not smooth enough, use the syringe to fill the small
hole at the top of the spindle. Once you've done this turn the
bearing whilst gently lifting the bearing housing. The oil will
disappear into the bearing and wash down the shaft. Because
of the very tight clearances of the bearing there may still be
small amounts of 'friction' - this will disappear as the bearing
runs in.
6. Put on the cotton gloves and pick up the acrylic platter, with the dip for the record label uppermost. Hold it level over the bearing
housing, locate it carefully and gently lower it until it seats fully over the bearing.
7. Take out one of the drive 'belts' and run it round the motor spindle and then round the platter. There are two ruts on the pulley of
motor. The above rut is for 45 rpm, and the nether rut is for 33.3 rpm. Different ruts for the different speed. Only one switch control
the motor. It could be found on the top of the motor housing and is a simple on/off.
The last step: Use the adjustable feet of the turntable to level the turntable using the extra spirit level.