Dante BLUESTREAM DA44AU Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Medienkonverter Dante BLUESTREAM DA44AU herunter. Dante BLUESTREAM DA44AU 12 Seiten.
Seite druckenRS-232 Control Port
The DA44AU can be controlled via a 3-pin Phoenix to serial RS-232 cable.
The communication settings and commands are as follows:
Baud Rate:
57600 bps
Data Bit:
8-bit
Parity:
None
Stop Bit:
1-bit
Flow Control:
None
RS-232 COMMAND
?
HELP
STATUS
RESET
PRESET xx APPLY
MUTE xx OUT yy
IN xx AUD yy zz
IN xx PHA yy
RS232BAUD z
NET DHCP ON/OFF
NET IP xxx.xxx.xxx.xxx
NET GW xxx.xxx.xxx.xxx
NET SM xxx.xxx.xxx.xxx
NET RB
08
DESCRIPTION
Print Help Information
Print Help Information
Print System Status And Port Status
Reset System To Default Setting
(Type "Yes" To Confirm, "No" To Discard)
Apply Preset xx
Mute On/Off Output yy
xx= On or Off
yy=[00]: All Output Ports, [01...04]: Output Port
Set Mic/Line Input And Sensitivity
xx=[00]: All Input Ports, [01...04]: Input Port
yy=MIC or LINE
zz=00: MIC: 00dB LINE: -10dB
zz=01: MIC: 05dB LINE: 00dB
zz=02: MIC: 10dB
zz=03: MIC: 15dB
zz=04: MIC: 25dB
zz=05: MIC: 35dB
Set Input Phantom Power On/Off
xx=[00]: All Input Ports, [01...04]: Input Port
yy= ON or OFF
Set RS232 Baud Rate To z
z = 1 2400, 2 4800, 3 9600, 4 19200, 5 38400, 6 57600 (default), 7 115200
Set Auto IP (DHCP) On Or Off
Set IP Address
Set Gateway Address
Set Subnet Mask Address
Reboot Network And Apply Default Config
DA44AU
|
www.blustream.com.au
www.blustream.co.uk
USER MANUAL