Dante DFO38012X Installations- und Betriebshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Installations- und Betriebshandbuch für Medienkonverter Dante DFO38012X herunter. Dante DFO38012X 5 Seiten. Fiber optic 10/100 ethernet transmission on 1 mm or sm optical fiber
Seite druckenExplanation for LED indicator lamp
LED indicator lamps serve as device monitoring and trouble display. The following is the explanation for each
LED indicator lamp.
Trouble shooting:
1. Device is not matched. Please select the corresponding network device according to the transfer rate of the
product (10Mbps or 100Mbps) when connected to other network devices (network card, hub, switch).
2. Excessive optical loss in connector plug-in and fiber welding and excessive intermediate nodes may cause
excessive loss rate or abnormal operation.
LED
indicator
Status
lamp
Connection status display for fiber link.
On
"ON" indicates that Fiber link is in correct
FX
connection.
Link/Act（FPL）
"Blink" indicates is transmitting through Fx
Blink
end..
Connection status display for Ethernet link.
On
"ON" indicates that Ethernet link is in correct
TX
connection.
Link/Act（TPL）
"Blink" indicates is transmitting through Tx
Blink
end.
On
Transceiver works in the full duplex mode.
FDX（10/100）
Off Transceiver works in the half duplex mode.
Power is on and normal.
PWR
On
Transfer rate of optical interface is 100Mbps.
FX/100（FRX）
On
On
Transfer rate of electric interface is 100Mbps.
TX/100（TRX）
Off Rate of Ethernet interface is 10Mbps
Explanation