Consort CRX2-03 Installations- und Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Installations- und Benutzerhandbuch für Controller Consort CRX2-03 herunter. Consort CRX2-03 5 Seiten.

Seite drucken
3. Basic operation
Before you can use CRX2, it has to be activated by tapping
any control icons. The LCD screen backlight will turn on. To
operate any control icon, tap within 2 seconds of CRX2
activation.
4. Time and day setting
1.
To enter time setting touch and hold
2.
The minutes will flash.
3.
Use
or
to set minutes.
4.
Tap
, the hours will flash.
5.
Use
or
to set hours.
6.
Tap
, the MON will flash.
7.
Use
or
to select day.
8.
Once you are happy with the settings, leave the CRX2
for 20 seconds. The settings will be saved and CRX2 will
return to the main screen.

5. Selecting operating mode

CRX2 has 4 operating modes:
BOOST, MANUAL, SET BACK and PROGRAM.
Each mode can be selected by activating the CRX2 and
tapping
to cycle through the options. The cycle sequence
will always start with BOOST mode followed by MANUAL, SET
BACK and PROGRAM.
6. MAN - Manual mode
In manual mode, the heater maintains the set temperature.
1. Tap
or
to set the temperature.
To amend the set temperature, tap any control button once
to activate, then tap
or
Once the temperature is set, leave the thermostat and the
settings will be saved.
10. Set 7-day programme
An example of one day programme on CRX2
PROGRAM 1
ºC
20
19ºC
10
06:00
I3984069 Iss 03
for 5 seconds.
to change the temperature.
PROGRAM 2
PROGRAM
4ºC
08:00
12:00
7. BOOST - 15 minutes
The boost feature temporarily increases the room
temperature. It can be used from any mode.
1. Tap
or
To amend the set temperature, tap any control button once
to activate, then tap
Once the temperature is set, you can leave the thermostat
and the settings will be saved. After 15 minutes, the CRX2 will
return to previous operating mode.
8. PROG - Automatic time mode
In this mode, the CRX2 will follow the week's time /
temperature programme.
You can override the temperature in PROG mode by simply
activating the CRX2 and using the
new temperature. The new set temperature will be then
maintained until the next program step.
Tap
to ADVANCE program, tap again to go back.
9. SETB - Setback mode
Setback mode can be used for frost protection, situations
where a minimum room temperature must be maintained, or
to disable the heating completely .
To set the temperature tap
temperature drops below the set temperature the heating
will be active.
To disable heating lower the temperature to below 4ºc and
she screen will show '- - -' The heating is now disable.
3
PROGRAM
22ºC
16ºC
14:00
to set the temperature.
or
to change the temperature.
or
.When the room
4
PROGRAM 5
22ºC
16:00
22:00
or
icon to set the
PROGRAM 6
10ºC
2