AudioQuest Niagara 3000AP Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte AudioQuest Niagara 3000AP herunter. AudioQuest Niagara 3000AP 16 Seiten. Low-z power / noise-dissipation system

Seite drucken

Installation | Unpacking

Before unpacking your Niagara 3000AP, inspect the carton for any obvious damage to the boxes and internal

protective materials. If internal damage is likely, contact the carrier who delivered the unit. If shipping damage is

evident on the product, then please contact your shipping carrier. Please save all shipping and packing materials.

Should you move or otherwise need to transport your Niagara 3000AP, these packing materials will ensure the

safest transportation.

The double box set should contain the Niagara 3000AP (NEMA-15 AC Outlets), two foam inserts, owner's manual,

Quick-Start Guide, front-panel polishing cloth, rack-mount kit, and warranty registration card. Registration is

recommended. In the event that your original ownership documents are lost, your registration can be used to

establish whether the unit is within the warranty period.

Safety Information | Warnings

Before operating the Niagara 3000AP, please read and observe all safety and operating instructions (or, at the very

least, the Quick-Start Guide). Retain these instructions for future reference.

¡ Do not disassemble or in any way modify the Niagara 3000AP. There are no user-serviceable parts inside.

¡ Keep away from moisture and avoid excessive humidity.

¡ Do not allow liquids or foreign objects to enter the unit.

Servicing | Return to AudioQuest

Servicing of the Niagara 3000AP must be performed by AudioQuest, and is only required when:

¡ The Niagara 3000AP has been exposed to rain, flooding, or extreme moisture.

¡ The Niagara 3000AP does not appear to operate normally. (See "Trouble-Shooting Guide. " )

¡ The Niagara 3000AP has been dropped and sustained considerable physical damage.

If sending the Niagara 3000AP to AudioQuest for servicing (or shipping it for any reason), please use the factory

approved packaging materials. If you have lost any of these (double carton, two foam inserts, one poly bag),

please contact AudioQuest for replacements. We will provide replacement packaging materials for a nominal

charge; shipping costs will be paid by the individual or company requesting the packaging material. Please do not

rely on other methods of packaging, including those provided or suggested by packaging/mailing stores. These

methods and materials could seriously damage the product, as well as its finish. Even the loss of the thick polybag

is enough to permanently damage the finish during transport. If you have lost the original packaging material,

please request replacement materials from AudioQuest.

Power Source

Ideally, the power source to which the Niagara 3000AP is connected should be adequate for use at 220-240V

single phase nominal voltage, 10 - 16 amps (current capacity RMS or greater).

For proper (best) operation, the Niagara 3000AP requires a safety ground (supplied via the power utility AC

wall outlet).

Placement

The Niagara 3000AP is manufactured with four rubber textured polymer feet for safe, secure placement on any

table, cabinet, shelf, or floor. When rack-mounting is required, these feet may be removed with a standard Phillips

screwdriver. The Niagara 3000AP's design obviates the need for compliant or high-Q isolation feet. Although