Audioroot eSMART BG-DU Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Medienkonverter Audioroot eSMART BG-DU herunter. Audioroot eSMART BG-DU 5 Seiten. Power distributor with universal fuel gauge

Seite drucken

UNIT CONNECTIONS AND CONTROLS:

2 buttons the calibration process is engaged for the selected battery. A long push (3 secs) on

the "-" button will manually reset the coulomb counter (orange value on the OLED screen). This

is very useful when hot-swapping batteries.

In eSMART mode (i.e with a eSMART Li-xxWh battery connected) these 2 buttons are

◦

inoperative.

4. 1

power switch. This switch enables power outputs group #1

5. 2

power switch. This switch enables power outputs group #2

6. 3

power switch. This switch enables power

outputs group #3

7. Power outputs group #1

8. Power outputs group #2 – On the BG-DU-

REG each of these 2 outputs are 12V/12W

fully regulated/isolated.

9. Power outputs group #3 – On the BG-DU-

REG these 2 outputs are 9V/2A regulated

(not isolated).

10. Power input connector

CONNECTOR PINOUT:

Power output connectors (groups 1, 2 and 3) :

•

1 : DC -

4 :

DC+

Hirose power input connector :

•

1 : DC -

2 :

eSMART DAT

3 :

eSMART CLK

4 :

DC+

http://www.audioroot.fr [email protected]

Ce document est la propriété d'AUDIOROOT, et ne peut-être reproduit ou communiqué sans autorisation

1. Low battery level led indicator

At boot time this led blinks a few times

◦

during the loading of the fuel gauge's

firmware.

In normal operation the led will start

◦

blinking when the state of charge of the

battery falls under 10%

2. OLED display

This display shows all the needed

◦

information regarding the state of charge

of the battery.

3. Battery selection buttons.

In standard mode these 2 buttons are

◦

used to change the battery index

number. By pressing simultaneously the