BELGACOM Forum IPhone 3020 Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Installationshandbuch für IP-Telefon BELGACOM Forum IPhone 3020 herunter. BELGACOM Forum IPhone 3020 18 Seiten.
Auch für BELGACOM Forum IPhone 3020: Kurzreferenz-Handbuch (2 seiten)

Seite drucken

2.2

Connecting to the Forum 3000 IPPBX on the LAN

Step 1 Cabling

Connect the LAN port of the phone to the connection point of the local area network using the

straight Ethernet cable supplied.

Step 2 Power

Connect the plug top power supply to the DC Power socket on the phone and to the electrical

mains.

The phone displays the message:

Forum IPhone

Booting.....

* *

Please Wait

Step 3 Getting an IP address from the LAN

The phone displays the message:

Connecting to

DHCP server

Please Wait ...

While this message is displayed, the phone obtains an IP address automatically from a DHCP

server on the LAN. DHCP is the Dynamic Host Control Protocol that is commonly used to

assign IP addresses automatically on a network.

address it proceeds to step 4.

However if there is no DHCP server present on the LAN the phone will display the following

message:

Could not connect to

DHCP server

followed by:

Press 'Menus' for

manual setup or

Auto Retry in 15

Menus

The phone will now count down to 0 before auto retrying to obtain an IP address. During this

period you may press the 'Menus ' key to manually programme the IP address of the phone

as follows:

DM 991 REV 2 04/09

Forum IPhone 3020 Installation Guide

When the phone has received its IP