DanVex DEH-1200i Betriebshandbuch - Seite 16

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Luftentfeuchter DanVex DEH-1200i herunter. DanVex DEH-1200i 20 Seiten. Air dehumifiers
Auch für DanVex DEH-1200i: Handbuch (14 seiten)

Seite drucken

Operation Notices

1. When moving the machine, do not incline the machine for over 45°to avoid

damaging the compressor.

2. Temperature for operation of this machine is 5-35℃.

3. When it is operating，the compressor gives off heat when it works，and

ambient temperature may rise by 1-3℃.Such phenomenon is normal and is safe to use.

4. When ambient temperature is below 10℃ and absolute humidity is relatively

low，there is no need to use dehumidifier.

5. The air inlet and outlet must be away from the wall for at least 10cm in order

not to impair the dehumidification effect.

6. Working environment shall be as airproof as possible to maximize

dehumidification on effect.

7. Dust on the air purification filter mesh may impair its effect or even cause

failure. Please clear regularly for at least once a month. If there is much dust in the

environment，it must be cleared once a week or once a day. Pull down the front

panel，clear the filter mesh. Tap the filter mesh slightly or eliminate the dust by vacuum

cleaner or place the mesh in warm water（≤40℃ and add appropriate neutral

scour）and brush and then wash with clear water and dry it. Direct sunlight or baking

shall be avoided to prevent deformation.

Common Troubleshooting

Failure

Dehumidifier

cannot work

Dehumidification is

not ideal

Water leak

Abnormal noise

Cause analysis

1.Power cut

2.Power

switch

energized

3.Power

cord

connected

4.Fuse is melted

1.Dust accumulated in air

purification filter mesh

2.Object blocking air inlet

and outlet

3.The door or window is

open

4.Refrigerant is leaking

1.The machine is inclined

2.Water pipe is blocked

1.The

machine

placed solidly

2.The

filter

mesh

blocked

Method

1.Recover the power

not

2.Energize the power

3.Connect the power cord

not

4.Replace the fuse

1.Clear the filter mesh

2.Remove

the

object

3.Close

the

window

4.Contact with distributor or

manufacturer for repair

1.Level the machine

2.Remove

the

object

not

1. Place the machine firmly.

2. Clear the filter mesh.

blocking

door

and

blocking