Audiotec Fischer Match M 5DSP Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Handbuch für Verstärken Audiotec Fischer Match M 5DSP herunter. Audiotec Fischer Match M 5DSP 16 Seiten. 5-channel, with integrated dsp

Seite drucken

Unique Features of the M 5DSP

Smart highlevel input

The latest generation of OE car radios incorpo-

rates sophisticated possibilities of diagnosing the

features (e.g. fader function) are often the result -

but not with the M 5DSP.

The new ADEP circuit (Advanced Diagnostics Error

Protection) avoids all these problems without load-

ing the speaker outputs of the OE radio during high

volumes unnecessarily.

Two power options

The M 5DSP has two power modes - the

"HighPower" mode for maximum performance and

"MidPower" mode with reduced output power and

lower power consumption for Plug & Play applica-

tions.

Automatic Digital Signal Detection

Switching from analog input to the digital input is

done automatically as soon as a signal is detect-

ed on the Optical Input. This feature can be deac-

tivated in the DSP PC-Tool software. Alternatively

you can use an optional remote control for manual

switching between analog and digital inputs

Power Save Mode

The "Power Save Mode" is incorporated in the ba-

sic setup of the DSP PC-Tool software. It allows

er) once there's no input signal for more than 60

seconds. Please note that in many up-to-date cars

with "CAN" or any other internal bus structures it

may happen that the car radio (and therefore the

M 5DSP as well) remains "invisibly" turned on for up

to 45 min. after leaving the car!

Once the "Power Save Mode" is active the output

stages of the M 5DSP and its remote output (Re-

mote Out) will be turned off, thus reducing current

draw to less than 250 mA. The amp will turn again

to full operation within 2 sec. if a music signal is

applied.

It is possible to either modify the turn-off time of

60 sec. or completely deactivate the "Power Save

Mode" via the DSP PC-Tool.