DURASONIC DS2L Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Ultraschall-Schmuckreiniger DURASONIC DS2L herunter. DURASONIC DS2L 18 Seiten.

for degas, and an S for Sweep. Use degas once your machine is fully heated, and then
use the sweep mode when you are cleaning for the best possible results!

Explanation of Controls

Control
Function
HEAT
Activates heat to 55 C Maximum.
TIMER
Activates ultrasonics and sets time.
Turn Knob to desired heat. Turn clockwise to hold position for
continuous heat operation.
Before You Start Cleaning
• Do not place parts or containers directly on the bottom of the cleaning
tray or wire to suspend items.
• Do not allow the solution to drop more 1 ½" from top of tank.
• Do not ever use alcohol, gasoline or flammable
fire or
explosion.
• Do not ever use mineral acids. These could damage the tank.
Failure to comply with these cautions will void your
Step
Action
1
Select your cleaning solution (refer for solution effects on metals)
2
Allowing for the volume of the parts you will be cleaning and operation level
line (one inch from the top)
3
Add cleaning solution to the tank of water
4
Plug the cleaner into a ground outlet
If this is the first time you are running the cleaner, or if you have changed cleaning
solution, you must degas the solution. If not, skip to "Cleaning Items".
CAUTION!
Use only water-based solutions.
solutions.
warranty.
NOTE:
9
tanks;
Doing so could cause a
use a