3xLogic VISIX Gen III Series Manuelles Menü - Seite 13

Blättern Sie online oder laden Sie pdf Manuelles Menü für Digitalkamera 3xLogic VISIX Gen III Series herunter. 3xLogic VISIX Gen III Series 19 Seiten. Hd analog cameras

Seite drucken

Motion Settings

The camera can detect movement and display an alarm on the screen, when movement is detected.
MOTION
1
EXPO
RGB
D&N
FUNC
MOTION
2
DET WINDOW
DET TONE
3
MDRECT FILL
4
SENSITIVITY
MOTION OSD
TEXT ALARM
SIGNAL OUT
EXIT JUMP
MOTION
1
To use the motion detection settings, before Motion is ON.
DET WINDOW
2
- WINDOW USE : Select which one of the motion areas to enable.
- WINDOW ZONE : The camera supports up to 4 different masks. Select which ones to display.
- DET H-POS : Move the zone left or right.
The higher the number, the zone will move to the right.
- DET V-POS : Move the zone up or down.
The higher the number, the zone will move down.
- DET H-SIZE : Adjust the zone's size horizontally.
The higher the number, the right side panel will move further to the right.
- DET V-SIZE : Reset the zone's size vertically.
The higher the number, the bottom panel will move down.
DET TONE
3
Four each dierent motion tone color available.
MDRECT FILL
4
Color setting for operating motion zone.
MOTI
PRIV
SET
EXIT
ON
WINDOW USE
WINDOW ZONE
____
DET H-POS
____
DET V-POS
5
DET H-SIZE
OFF
DET V-SIZE
OFF
RETURN
ON
DET WINDOW
0
ON
1
1
58
32
Pg. 13