DURASTAR 12B Benutzer- und Installationshandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzer- und Installationshandbuch für Thermostat DURASTAR 12B herunter. DURASTAR 12B 10 Seiten. Wired thermostat

Seite drucken

Field Supplied Installation Accessories

The following installation accessories are required and must be purchased separately.
•
Anchors

Optional Accessories

The following installation accessories are optional and can be purchased separately.
•
putty
•
DRPDRAD09F1A16 display control panel
•
DRPDRAD09F1A17B male to male adaptor from the display control panel to the IDU

Tools Needed

The following tools are required for installation.
•
Phillips screwdriver
•
Flat head thermostat screwdriver
DURASTAR.COM
6

Mounting The Thermostat

Before you connect the thermostat, chose a location for the thermostat and decide whIch mounting
type you will use, exposed or embedded. The thermostat can be no farther than 20' from the indoor
unit. Consider looking at the steps to connect the thermostat, to help determine where to place the
thermostat.

Exposed Wire Mounting

1.
For exposed mounting, break out a tab hole on one of the four sides of the thermostat for the wire.
Left Side
Wire Outlet
2. Remove the top panel of the thermostat by inserting a screwdriver into the two slots on the bottom.
Slots
WARNING
• The Printed Circuit Board (PCB) is mounted in the upper panel of the thermostat.
Be careful not to damage the board with the screwdriver.
Top Side Wire Outlet
Right Side
Wire Outlet
Bottom Side Wire Outlet
DURASTAR.COM
7