4 BOX 4b RelePro S Gebrauchsanweisung und Installationsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung und Installationsanleitung für Relais 4 BOX 4b RelePro S herunter. 4 BOX 4b RelePro S 2 Seiten.

Seite drucken

Instructions for use and installation

General description

Relè Pro Smart is a double output connected via WiFi/BLE,

with double relay on board operating in a range 100-240V up

to a max. of 5A+5A; the double Relè is Smart, i.e. controllable

remotely via smartphone App, and can assume light control

and motor control functions for rolling shutters.

1. Push button with RGB LED backlite

2. Terminals I1 and I2 for optional button inputs

3. O1 and O2 terminals which return the phase of the load

connection device

4. L live terminals

5. Neutral N terminal

Operating mode

Relè Pro Smart can be programmed to have the following

functions:

•Single button

•Double button

•Engine control

It can be controlled via Smartphone or via voice assistants.

Confuguration

To perform the first installation, replacement and/or removal

of a device and for any other information, refer to the manual

which can be downloaded from the site.

Precautions for use

All direct connections to the mains conductors must

be carried out by trained and authorized technical

staff. Pay attention to any danger indications placed

on the device or contained in this manual highlighted

with the symbol (

Do not use the device in gas saturated environments.

Do not place the device near heat sources.

Use only indoors.

Installation rules

Installation must be carried out by qualified staff

in compliance with the provisions governing the

installation of electrical equipment in force in the

country where the products are installed. The

installation must be carried out with the system

switched off.

Warranty

This product is covered by a 2 years from the date of purchase

on parts and labor warranty. To enforce the guarantee it

is necessary to keep the proof of purchase. The warranty

does not cover any damage due to shocks or accidents. The

components of the appliance must not be opened or repaired

by people outside 4box company.

For more

info. 4box.it

Technical info

7 x 2,5 mm

+5 °C

+45 °C

Operation voltage

100V – 240V /50-60Hz

Maxi electric current

5A + 5A

Max load

2300W

Technology

Radio WiFI/BLE

Exercise frequency

2.4 GHz

Standby consumption

1 Wh

Maintenance and cleaning

Before cleaning, disconnect the product from the power

supply. The product does not require specific maintenance. To

clean the product, use a simple dry cloth. Do not use abrasive

or corrosive substances. Do not spray cleaning products

directly on the switch.

Disposal

This logo indicates devices that are no longer

usable cannot be placed in the normal containers

for ordinary waste. The toxic substances that may

be contained in them, in fact, could represent a

risk to health and the environment. These devices

should be returned to your dealer or disposed of as

determined by local authorities.

Declaration of Conformity

4 BOX declares under its own responsibility that the Relè Pro

Smart device complies with the following directives and that

this conformity has been assessed in compliance with the

respective applicable standards:

• Directive 2014/53/EU (effective use of the radio spectrum in

order to avoid harmful interference).

• Reference standard: ETSI EN 300 328 V2.2.2

• Directive 2014/35/EU (protection of users' health and

safety).

• Reference standard: EN 62368 -1:2014+A11:2017

• Directive 2014/30/EU (protection requirements regarding

electromagnetic compatibility).

• Reference

standards:

CEI

55032:2015,

55035:2017+A11:2020 and ETSI EN 301 489-1/17.

• Directive 2013/35 /EU (protection requirements regarding

physical agents).

• Reference standard: CEI EN IEC 62311:2021

• RoHS directive.

Wiring diagrams

Button or

switch *

Relè Pro Smart for a light.

Diverter

Diverter*

Relè Pro Smart used like a inverter.

*In the input it can be connected indiscriminately to Phase (L) or to Neutral (N)

Button or

switch *

Mandatory for loads >5A

Button or

switch *

Relè Pro Smart for two lights.

down

Interlocked auxiliary

control

Relè Pro Smart Interlocked

control for one motor.