Abus Nexello PLMK10100 Betriebshandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Sicherheitssensoren Abus Nexello PLMK10100 herunter. Abus Nexello PLMK10100 19 Seiten. Bypass opening detector

Seite drucken

2.4. Reset to factory settings

2.5. Wake-up / Wake up device

Press and hold the Link button for at least 5 seconds.

Release the button when the red LED stops blinking

and lights up continuously. The device is now reset to

factory settings.

Hint:

This procedure should only be used if the primary

gateway is not capable of acting. If the device is set to

factory default, the status is set to "not included" and

the association settings and possible configurations

are reset to default.

Press the Link button once to wake up the device. It

will then establish a connection to the Z-Wave gateway

and transmit the current status.

English