Duratool D03131 Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für Multimeter Duratool D03131 herunter. Duratool D03131 12 Seiten. 3 1/2 digital multimeter
Seite drucken
Button
1
Active store function. Store the measuring data to the memory.
2
Active read function. To view the data store in memory, change the cursor
position.
3
1. In DCV, ACV, continuity mode press the button to view the max value,
min value, average value, upper limited value, lower limited value and
relative value.
2. In Insulation mode press to view the max value, min value, average
value, upper limited value, lower limited value, preset timer, DAR and PI.
4
Confirm button.
5
Back light on/off.
6
Activate the timer function.
7
Activate the hold function in DCV, ACV or Continuity, or the lock function in
Insulation.
8
Activate the REL function in DCV, ACV or Continuity and change the cursor
position.
9
Activate the compare function.
10
Select one test output voltage for insulation test.
11
Activate the Insulation test.
Position
OFF
Turn off the Meter power
V
DC Voltage 0.1V ~ 1000V
~V
AC Voltage 0.1V ~750V
Ohm and continuity 0.01Ω ~ 200.0Ω
Insulation Insulation test 0.01MΩ ~ 10.00GΩ, test output voltage 50V (default)
100V, 250V, 500V, 1000V. The test output voltage will be saved.
Terminal
HI
VΩ
Input/output positive terminal
COM
Common terminal except insulation measure
LO
Common terminal in insulation measure
POWER-UP OPTIONS
•
Holding a button down while turning the Meter on activates a power-up option.
Power-up options allow you to use additional features and functions of the Meter.
•
To select a power-up option, hold down the appropriate button indicated while
turning the Meter from OFF to any switch position. Power-up options are cancelled
Description
ROTARY SWITCH
Function
INPUT TERMINAL
Description
6