4 Sizzle POAAIR06 Betriebsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Redner 4 Sizzle POAAIR06 herunter. 4 Sizzle POAAIR06 7 Seiten. 2.1ch tower speaker bluetooth / usb / fm / aux

Seite drucken
Setup
Carefully take the tower body and base out of the packaging.
x
take the screws and washers out
x
Attach the base to the body aligning the three holes in the base with the three holes in the tower
x
Screw the base into the body
x
Stand the tower upright on the floor. The appliance is now ready for use
General operation
x
Press the POWER button to turn on or tum off the unit.
x
Press the SOURCE button repeatedly to select the playback source. The LED indicator will light blue
according to BT mode
x
/
Press the
x
/
Press the
x
lf the unit is not used for a long period of time, pull out the plug to turn off the unit completely.
Radio FM
x
Press
the POWER button to turn on or tum off the unit.
x
Press the source button to select FM mode. The unit FM indicator turn green.
x
Pressing the skip buttons will make the unit search for the next station in the direction you have chosen.
It will stop and play automatically.
AUX In (requires an 3.5mm audio cable )
x
Connect your auxiliary device (e.g. smart phone/ MP3 player) to the 3.5mm AUX jack
x
Press POWER button to turn on the unit. Press the SOURCE button repeatedly unit the AUX indicator turn
green.
x
Press
on
your auxiliary source.
x
Adjust the volume to desired level.
x
To stop playback, disconnect your auxiliary source from the AUX jack.
USB
You can connect a USB flash device (not included) to the USB port t on the unit to play MP3 files.
x
Press the POWER button to turn on the unit.
x
Press SOURCE into the USB mode. the USB indicator will turns green.
x
USB device can auto play
x
/
Press
to select track.
Note:
y Supported format: MP3 (32kbps-320kbps)
y The total number of MP3 files on the Memory Device should not exceed 999.
y If you can't easily insert the memory card, you may have inserted it incorrectly. Try to turn over the card
and then insert again.
y For playing files on USB flash drive, you should plug in the USB flash drive when the unit is in standby
mode. Turn ON the unit and use SOURCE button to select USB mode.
Buttons to adjust volume level.
Button control to choose the tracks.
How to use