DAPAudio D1255 Anleitung Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Aufnahmegeräte DAPAudio D1255 herunter. DAPAudio D1255 16 Seiten.

Seite drucken

Installation

CDR-110 Installation

Remove all packing materials from the device. Check that all foam and plastic padding is removed.

Screw the device in a 19" Rack. Connect all cables.

Always disconnect from electric mains power supply before cleaning or servicing.

Damages caused by non-observance are not subject to warranty.

Set Up and Operation

Before plugging the unit in, always make sure that the power supply matches the product specification

voltage. The power supply is printed on the back of the device.

Do not attempt to operate a 115V specification product on 230V power, or vice versa.

Connections

1. Turn off the Power (1) switch.

2. Connect the Line Out (22) to the input of your mixer.

3. Connect the source you want to record to the Aux In (23) input.

Be sure that the power is off, when connecting the cables.

Names and Functions

Below is a description of the functions of the controls.

1) Power:

When the power switch is pressed the device turns on.

2, 25) Direct Access buttons:

Press track 0-9 buttons to select tracks directly.

3) CD Slot

Place the CD gently in the slot. The CD will load automatically. Stop playback and press the eject

(10, 30) button to eject the CD.

4, 34) Program:

Press the Stop button to stop playback. Now press the Program button to enter program mode. See

12. Program Play on page 11 for more info.

5) Remote sensor:

This sensor receives the information of the remote control. Don't place any object or sticker in front of

the sensor.

6, 38) Rev

Press this button to go back to the beginning of the current track or select a previous track for

playing. Press and hold this button to play the track fast backwards.

7, 37) Cue

Press this button to skip to the next track. Press and hold this button to play the track fast forward.

8, 33) Stop

Press this button to stop playback.

9, 32) Play/Pause

Use this button to start playback. Press once to start playback, twice to set the pause mode. Press

again to resume playback.

10, 30) Eject

Press this button to eject the CD.

11) Rec level VU meter:

Allows you to monitor the Aux in (23) input to record without distortion by using the Rec input vol (21)

control.

12) SD MMC card:

Use this port to connect your SD/MMS card for playback/recording.