Duratool D03121 Kurzanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Kurzanleitung für Messgeräte Duratool D03121 herunter. Duratool D03121 4 Seiten. Motor & phase rotation indicator
Seite druckenConfirm Motor Wiring
•
Connect one end of the test line to the indicator and connect L1, L2 and L3 test
lines to the corresponding input jack.
•
Connect the alligator clip to the other end of the test line.
•
Clamp the alligator clip to the motor connector, L1 to U, L2 to V and L3 to W.
•
Press the "TEST" button and the power light turns green, indicating that the
indicator is ready for testing.
•
Half turn the motor driving shaft to the right.
Detect Magnetic Field
•
If you intend to detect magnetic field, you should place the indicator into the
electromagnetic valve. If the "Clockwise rotation (R)" or "Counter-clockwise
rotation (L)" indicator light is on, it means the magnetic field exists.
TECHNICAL SPECIFICATION
Operating Temperature
Storage Temperature
Altitude
Anti-explosion type
Safety Class
Maximum working voltage
Nominal voltage (rotation direction) 2~400V AC voltage, 2~400Hz
Nominal voltage (phase sequence) 120~400V AC voltage, 2~400Hz
Test current (per phase)
Battery type
Size and Weight
MAINTENANCE AND REPLACING THE BATTERIES
•
Periodically wipe the case with a damp cloth and mild detergent. Do not use any
chemicals, abrasives or solvents that may damage the indicator.
•
Unscrew the bolts of the battery cover.
•
Remove the cover and old battery.
•
Replace with a new battery of the same specification.
•
Replace the battery cover and tighten the back cover.
INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF
ELECTRICAL & ELECTRONIC EQUIPMENT.
When this product has reached the end of its life it must be treated as Waste
Electrical & Electronics Equipment (WEEE). Any WEEE marked products
must not be mixed with general household waste, but kept separate for the
treatment, recovery and recycling of the materials used. Contact your local
authority for details of recycling schemes in your area.
0~40°C, maximal 80% humidity (non-
condensing)
-10~50°C, maximal 80% relative humidity (non-
condensing)
<2000m
IP40
IEC61010-1 600V CAT III, Pollution class II
400V AC voltage
<3.5mA
1.5V AA
125mm x 66mm x 30mm, approx 90g
Made in China. PR2 9PP
V 1.0