DAPAudio DLM-12SA Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem DAPAudio DLM-12SA herunter. DAPAudio DLM-12SA 16 Seiten.

DLM-12A / DLM-12SA

One Active Subwoofer & Two Active Satellite Speakers

1) Make your initial connections with all the equipment powered off and ensure that all the main volume

controls are turned completely.

2) Connect one side of signal cable at your mixer into Main Output Left (with II4"Jack or XLR) and the

other side of the cable into the Input A of the DLM active subwoofer. Repeat for the channel. With the

second signal cable connected the HIGHPASS A of the subwoofer (input BXLR) to the Line input

(COMBO) of the active satellite (with Stereo-Jack or XLR). Repeat for the RIGHT channel.

4) Connect the power cords to main.

5) Turn on your mixer first, then the active speaker cabinets.

6) Turn up the volume controls of the active speaker cabinets.

7) Use PFL function to get the proper input level for the mixer and adjust the Main Mix Level.

8) After using your equipment, turn off your active speaker cabinets first, then the mixer.

Ordercode: D3223 / D3224