DURAVAC VJH1211PF 0501 Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Staubsauger DURAVAC VJH1211PF 0501 herunter. DURAVAC VJH1211PF 0501 16 Seiten.

Seite drucken

INSTALLING & CLEANING FOAM WET FILTER

INSTALLING FOAM WET FILTER

1. Verify that the power cord is disconnected from the outlet (Fig. 1).

2. Remove the power head and place in upside down position. Follow instructions to remove the

cartridge filter.

3. Carefully slide foam wet filter down over the filter cage making sure the cage is completely

covered (Fig. 2 & 3).

4. Place the power head onto the collection tank.

CLEANING FOAM WET FILTER

1. With the removed power head in an upside down position, carefully remove the foam wet filter

(Fig. 4).

2. Use a mild soap and water solution to wash the foam wet filter and rinse with clean water (Fig. 5).

3. Allow the filter to air dry for 24 hours before installing onto the filter cage.

WARNING

! TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE

TROUBLESHOOTING.

PROBLEM

The wet/dry vacuum will not

operate.

The dust comes out from the

motor cover.

Reduced efficiency and motor/

speed vibration.

TROUBLESHOOTING

POSSIBLE CAUSE

No power supply.

Faulty power cord.

Collection tank is full.

Switch in the wrong position.

The cartridge filter is missing or

damaged.

Vacuum has been used to

collect fine dust, such as dry

wall dust, fireplace soot, or

ash, without a fine dust filter

equipped.

There are blockages in the

nozzle, hose, or the collection

tank inlets.

The cartridge filter is clogged by

fine dust.

Check the power supply, cord,

breakers, and fuses.

Unplug and check the power

cord. If damaged, have it

repaired by a professional.

Empty the collection tank.

Press the ON 'I' button on the

power head.

Attach or replace the cartridge

filter.

Remove the standard cartridge

filter and install the appropriate

fine dust cartridge filter.

Unplug and check nozzle, hose

and collection tank inlets for

blockages.

Take off the filter and clean it or

install a new cartridge filter.

SOLUTION