Addonics Technologies AE25RDESU Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gehege Addonics Technologies AE25RDESU herunter. Addonics Technologies AE25RDESU 8 Seiten. Portable dual drive raid enclosure
Seite drucken
How to Configure Raid
Raid Setting Table
Display
RAID Status
0
BIG (span)
1
JBOD (single)
2
FAST (strip)
3
SAFE (mirror)
4
SAFE33
5
SAFE50
6
RESERVED
7
GUI ONLY
How to Build Raid JBOD
a. Setup Raid mode JBOD using RAID selection switch
1
JBOD (single)
b. USB Connection
Plug in mini USB data cable & USB power cable as shown.
USB Power
Cable
RAID Selection Switch
4
2
OFF
OFF
OFF
OFF
OFF
ON
OFF
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
ON
ON
ON
OFF
ON
ON
ON
OFF
OFF
ON
USB Data Cable
c. Plug the other end of the mini USB data cable & USB power cable to USB ports
on your system.
Note:
1
eSATA Connection
If you are connecting via eSATA, you will have to connect the USB power cable
or the 110/220V AC/DC 5V power adapter.
Note:
d. Turn on the power switch.
Power Switch
e. Press the "RAID Setting" button once.
Note:
f. Place the cursor on the My Computer icon on your desktop, do a right click and
choose "Manage" by clicking mouse left button
Due to the different layouts of Laptops, we suggest to plug the USB
cables on opposite sides of the Laptops to avoid weak power from the
same side USB ports.
Avoid using the front USB ports of desktop because, sometimes, it is too
weak to give enough power.
To see 2 individual drives (JBOD single) using eSATA connection, the
enclosure must be connected to a port multiplier compatible SATA host
controller.
Since the default Raid mode may be different from your new Raid mode
setting, it is required to press the "RAID Setting" button once before
using Portable Dual Drive RAID enclosure.