Contemporary Controls CTRLink EIDX MP Series Installationshandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Contemporary Controls CTRLink EIDX MP Series herunter. Contemporary Controls CTRLink EIDX MP Series 8 Seiten. Managed poe pse ethernet switching hubs

Seite drucken

Port Locations

Ports 1–8 are accessed on the front panel. Other ports

are located on the bottom of the enclosure — and

for 24-port models, also on the top surface.

On all models, PoE is provided on ports 9–16

which are on the bottom of the unit.

An example of port arrangement on the top and

bottom of the enclosure is shown in Figure 6

which locates a few of the ports on the model

EIDX24MP-100T/FC.

Fault Relay

This relay is disabled by default. Its operation is

explained in the Software Manual. Its contact is

normally closed and rated at 500 mA, 24 V (max).

Console Port

The Console Port uses the standard RS-232 protocol for

configuring the switch. For proper communication :

Set the Baud rate to 9600.

Set the Data bits to 8.

Set the Parity to None.

Set the Stop bits to 1.

Set the Flow control to None.

TD071100-0IA

Figure 6 — Port Locations

Figure 7 — Console Port