Addonics Technologies ADSA3R5-E Spezifikationen

Blättern Sie online oder laden Sie pdf Spezifikationen für Computer Hardware Addonics Technologies ADSA3R5-E herunter. Addonics Technologies ADSA3R5-E 1 Seiten.

Seite drucken

SPECIFICATIONS

Chip Set: Silicon Image Sil3124 Integrated Host

Controller

Interface: PCI bus compatible

I/O Ports: 3 SATA ports and 1 eSATA port

Regulatory approvals: FCC, CE

Features:



Supports Serial ATA Generation 2 transfer rate

of 3.0 Gbps (300 Mb/s)



Supports First-Party DMA Commands for NCQ

(Native Command Queuing)



Supports RAID0, 1, 5, and 10 using Silicon

Image SATARAID5 Array Manager



Supports individual drive mode



Fully compliant with Serial ATA 1.0a and Serial

ATA II Extensions to Serial ATA 1.0a

Specifications revision 1.1



Hot-plug capability



Port Multiplier Compatible

RAID Described:

Stripe (RAID 0): Greatly increases the performance of

data transfer by simultaneously writing data to 2 or more

drives.

Mirror (RAID 1): duplicates or mirrors the data on both

drives. No data will be lost if one of the drives fails.

Mirror-Striping (RAID 1+0) Combined both Striping

and Mirroring technologies to provide both the

performance enhancements that come from Striping

and the data availability and integrity that come from

Mirroring.

Parity (RAID 5) Adds fault tolerant to disk striping by

including parity information with the data.

INSTALLATIONS

Software Installation:

Note: Install the SATARAID5 array manager utility from

the CD that came with your package first before

installing the SATA Host Controller.

From the CD start-up menu select Auto Play >

SATA RAID Utilities > Model #ADSA3R5-E.

Unzip the file on your drive. Folder name is

SATARAID5_Utility_3124.

C. On the GUI folder install 3124-W-I32-R_15110.msi

(SATARAID5 software).

ADDONICS TECHNOLOGIES

Model: ADSA3R5-E

D. From the CD start-up menu select SATA Adapters

> Model #ADSA3R5-E.

Unzip the file on your drive. Folder name is 3124r5.

Hardware Installation:

Power off PC and remove its cover.

Select an empty PCI or PCI-X slot and insert the

SATA host controller.

Makes sure to secure the bracket with a screw.

Close the PC's cover.

Windows 2000, XP, 2003, 2008 Server Driver

Installation

Turn computer ON. When Windows boots up, "A

New Hardware Found" pops on the screen and the

Addonics Serial ATA PCI Host Controller is

identified.

At the "Add New Hardware Wizard Window, click

"Next"

Choose "Select for the best driver for your devices",

and click "Next"

Navigate to the folder where you extracted the

3124r5 driver.

If using a driver that has not been digitally signed

by Microsoft, you will be asked if you want to

continue the installation. Click Continue.

When the new hardware wizard has finish installing

the Serial ATA card. Click "Finish" to complete the

installations.

Confirming Serial ATA Driver Installation

Right click the My Computer icon and select

Manage.

Click Device Manager in the Menu Tree.

Click the "+" sign in front of SCSI controllers.

Silicon Image SoftRAID5 controller should

appear.

Important Note:



TECHNICAL SUPPORT

(8:30 am to 6:00 pm PST)

Phone:

Email:

To do a RAID SET with 4 SATA drives directly

connected to the SATA ports on the controller

card, you can press F4 or CTRL+S from the boot

up screen. Read and follow the instruction inside

the BIOS screen.

You can also install the SATA GUI utility Under

Windows to monitor the RAID Set. It is under the

Utility section of the driver disc.

If you have a port multiplier (PM) with 5 drives and

connect the PM to the SATA controller card, in

the RAID BIOS of the SATA controller card, it will

only display 1 drive and that is the drive connected

to port 1 on the PM. To see all 5 drives, you would

need to be inside the operating system disk utility.

408 573-8580

http://www.addonics.com/support/ticketid/