Addonics Technologies MMTPRO Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Computer Hardware Addonics Technologies MMTPRO herunter. Addonics Technologies MMTPRO 4 Seiten. Multi-media tower pro mmtpro

Seite drucken

Media Installation: Bay 3 (Internal SATA/USB DigiDrive)

The SATA Digi Drive will recognize only one media device at a time. If more

than one media device is inserted, the device found earlier on this list of slots

will be used: CompactFlash, SmartMedia/xD, SD/MMC/miniSD, MS/MS Duo.

The CompactFlash slot accepts CompactFlash media including CF Micro-

drives. Insert media connector first with label side up.

The SmartMedia/xD slot accepts SmartMedia (SmartCard) or xD Picture Card

devices. Insert SmartMedia contacts down with the "cut" corner toward the slot

on the left side. Insert xD Picture card media contacts first, facing down.

The SD/MMC/MiniSD slot will accept SD, SDHC and SdxC devices or a

miniSD installed in an adapter as well as Multi Media Card (Smart MMC)

devices. Insert media contacts first, facing down.

The MS/MS Duo slot accepts Memory Stick or Memory Stick Pro Duo devices,

insert media contacts first, facing down.

Drive Installation: Bay 4 (Multimedia Bay Hard drive)

1. Gently pull the lever until the door swings open.

2. Gently insert a SATA 3.5" hard drive or device installed in a Snap-In 25

adapter (not included), SATA connectors first, facing down. The drive should

give little resistance, DO NOT FORCE IT.

3. Gently close the door over the drive until it closes, then press firmly until it

snaps in place. The drive will power up immediately.

www.addonics.com

Phone:

Fax:

Email:

408-573-8580

408-573-8588

http://www.addonics.com/sales/query/