AFA Godeater Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Musikanlagen AFA Godeater herunter. AFA Godeater 2 Seiten. Bass fuzztortion

Seite drucken
GODEATER
Congratulations! You are now the
proud human to an Animal Factory
Godeater bass fuzztortion.
Like yourself, we were bored of the status
quo of bass fuzzes with a neutered low
end - so we developed a pedal so
bass-heavy, it would wake up old Gods
and Titans in the deepest abysses of
Tartarus.
This pedal is designed to shake the
earth if used correctly. we advise you
to read this manual to get the maximum
out of your Godeater...
Although the Godeater was designed
for bass guitar, it might just be the most
versatile
pedal
yet.
With
extreme
compression and saturation in the low
end, this is a very unique circuit that is
not a clone of any existing pedal.
The idea behind the Godeater was to
be able to run the pedal 100% distorted
and have a full, strong bass response
without having to dial the clean signal
back in. The Godeater distinguishes
between global gain and saturation
with two stages of gain control. The very
musical EQ can thin out the sound or go
deep into the subs. Initial stages of R&D
noted clipping on input signals as slow
as 10 Hz!
From adding a subtle grunt, blending
clean and dirty sounds to full doomy
chords, this pedal does it all and more.
The extended bass response makes it
an ideal choice for downtuned or
baritone guitar, but also bass synths
and drum machines.
Go through this manual to get started.
We take no responsibilty for apartment
blocks razed in the process.
SAFETY & TIPS
We attempt to build safe products.
Here are some further cautions you should
exercise while using them.
1. Operate with a standard pedal power
supply (not included) - Boss style negative
center, 2.1mm, 9V DC.
2. Do not eat Godeater. Neither are you a
Titan, nor will "Godeatereater" add value
to your resumé.
3. While the Godeater pedal can handle a
theoretical maximum of 15V, it was
designed for use at 9V. You may in fact see
an INCREASE in noise and erratic
performance while increasing the voltage.
We strongly advise against exceeding 12V
on the power supply. 15V and above will
fry the pedal.
4. Going into a high-impedance load (e.g.
a guitar or bass amplifier set to high or a
Hi-Z input) will help maintain an even
volume when using the blend mode
5. If you do not plan to use the clean
output on the ring, we advise you to
disconnect the connector from the clean
through header.
TECHNICAL DETAILS
Power: 9-12V DC, 100 mA
Uses a 2.1 mm DC jack with negative
center (Boss-style pedal standard power
supply)
Input Impedance: nom. 1MΩ
Output Impedance: nom. approx 2kΩ
WARRANTY
All Animal Factory Amplification
products, unless otherwise specified, are
protected by a 2-year warranty on
manufacturing and workmanship. This
does not cover cosmetic damage by
routine use or damages through user
modification.
CONTACT US