APlusLift HW-10KBP Handbuch für Installation und Betrieb - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für Installation und Betrieb für Hubsäulen APlusLift HW-10KBP herunter. APlusLift HW-10KBP 20 Seiten. 2-post floor plate car lift 10,000lb capacity
Auch für APlusLift HW-10KBP: Installationshandbuch & Betriebsanleitung (16 seiten), Handbuch für Installation und Betrieb (20 seiten)
Seite drucken
Step 5 (Installing Swing Arms)
Locate the 4 swing arms and swing arm pins. Take one of the arms and insert it over
the hole in the carriage torsion tube. Line up the holes and insert the pin. Repeat for
the three other arms.
We recommend putting 3-stage arms on the front and 2-stage arms on the back when
the car lift is used asymmetrically. Details
Step 6 (Electrical Connection to Power Unit)
Warning: T
electrician to connect the power unit to a 220V power outlet. Please
protect each circuit with a time delay fuse or circuit breaker.
The car lift uses a 220V single phase power unit. The running amperage is 10A.
Recommend a 30A breaker and a 10-gauge wire.
For 220V single split phase with two hot wires:
◦ wire brown to hot 1
◦ wire blue to hot 2
◦ wire yellow/green to ground
For 220V power with one hot and one neutral wires:
◦ wire brown to hot
◦ wire blue to neutral
◦ wire yellow/green to ground
See the figure on the right for reference.
he wiring must comply with local code. Please find a certified
11