Apogee Symphony I/O Mk II SoundGrid Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte Apogee Symphony I/O Mk II SoundGrid herunter. Apogee Symphony I/O Mk II SoundGrid 20 Seiten. For units equipped with the wsg option card
Seite drucken
Connections
Thanks to the flexibility of the SoundGrid system, it's possible to start with just a single Symphony I/O interface
and build your system as the need arises. Even without a SoundGrid DSP Server, it's possible to expand your
setup to 128 channels of I/O and up to 8 Mac and Windows computers. Add the DSP Server for low latency
mixing and recording with Waves plugins plus greatly expanded DSP capability.
Basic setup:
1. Using a CAT5e or CAT6 ethernet cable, connect the WSG Option Card's ethernet port to your
computer's ethernet port.
This is the simplest setup. Note that:
● This is just like connecting a USB or Thunderbolt interface to your computer, only you are using an
Ethernet cable instead.
● The SoundGrid software integrates the Symphony I/O MkII with your audio software via ASIO drivers
on a PC, or CoreAudio drivers on a Mac. No separate Apogee software needs to be installed.
● *Monitoring must be done via your recording software as there is no low-latency eMotion ST Mixer.
● *Plugins would be inserted into your recording software as usual.
Once you learn how the basic setup works, it is not hard to build a more powerful system.
*Adding a DSP server offloads plugin processing from your DAW. This enables you to use the eMotion ST
Mixer and StudioRack plugins, add additional plugins, and record and monitor with very low latency.
Expanded Setup:
1. To connect multiple devices - for example: multiple Symphony I/O MkII's, a SoundGrid DSP Server, or
multiple Mac and Windows computers - connect them all to a SoundGrid-compatible ethernet switch,
and connect the switch to your computer's Ethernet port. Use a CAT5e or CAT6 cable for all
connections.
See
h ttp://www.waves.com/hardware/soundgrid-switches
APOGEE SYMPHONY I/O MK II SOUNDGRID USER'S GUIDE
for a list of approved switches.
Page 7