Dasan BT700B-UC Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kopfhörer Dasan BT700B-UC herunter. Dasan BT700B-UC 7 Seiten.

Seite drucken

Using the headset

..
Answer a call
l
Press the answer button briefly.
Make a call
l
Dial the number on the mobile phone and press the answer button briefly.
End a call
l
Press the answer button or end the call on the mobile phone.
Volume adjustment
l Press volume up/volume down to adjust the
listening volume. There is a small notch on
each volume button that makes them easy to
find. The headset listening volume can also
be adjusted on the phone.
Note that high listening volume settings may
cause echo or other noise on the line, for one
or both parties on the line. Try to lower the
listening volume if this is the case.
Important! – High listening volume settings
may be harmful to your hearing.
Headset ring alert adjustment
The type of ring alert signal in the headset will vary depending on your telephone
model. Some phones will transfer your ordinary ring melody to the headset. In these
cases, the volume and ring melody adjustments are made in the phone.
With other telephone models, there is an internal ringer alert in the headset when you
receive an incoming call. This ringer alert tone can be set to two different modes.
For using this function, disconnect Bluetooth device with the phone.
l
Press and hold Volume Up and Down simultaneously for 1 second. A beep tone
is heard in the speaker.
l
To resume the default setting, press Volume Up and Volume down
simultaneously briefly. A beep tone is heard in the speaker.
Mute
l
Press and release the mute button. Press again to resume the call.
A beep tone is heard every thirty seconds when mute mode is active.
Transfer sound from/to the headset or mobile phone
l
To transfer the sound from the phone to the headset, use the mobile phone.
Refer to the manual of the mobile phone.
Voice dialing
l
Press and hold the answer button 2-3 seconds to activate voice dial.
In general, voice dial must be activated on your phone before you can use it. For
more information on voice dialing and voice commands, refer to your phone's
user guide.