Apogee Instruments TS-110-SS Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Heizgerät Apogee Instruments TS-110-SS herunter. Apogee Instruments TS-110-SS 18 Seiten. Fan-aspirated radiation shield

Apogee Instruments TS-110-SS Benutzerhandbuch

SENSOR MODELS

TS-100 fan-aspirated radiation shields accommodate multiple air temperature and humidity sensors using sensor
port adapters. The following standard port adapter options are available (probes not included, the TS-110 includes
the ST-110 thermistor, the TS-120 includes the EE08-SS humidity probe, the TS-130 includes both the and EE08-SS
and ST-110):
Apogee Instruments model ST-110
Apogee Instruments model EE08-SS
Apogee Instruments model ST-300
Campbell Scientific model CS215
Vaisala models HMP155, HMP110, and HMP60
Rotronic model HC2-S3*
E + E models EE071
All sensor port adapters are capable of holding an ST-110 or ST-300 (user selected) air temperature sensor and a
temperature/humidity probe (if desired).
EE08-SS: Sensor model number and serial number are located on the probe
body between the connector and filter cap.
*If the Rotronic HC2-S3 probe is used with the E3 Active Set module, it must be water-proofed before use with the
Apogee TS-100 radiation shield. The E3 Active Set module is not water proof (water can infiltrate at the point
where the cable enters the housing). A small length of water-proof heat shrink (ATUM heat shrink) can be used to
seal the gasket where the cable enters the housing for the E3 Active Set. For more detail, contact technical support
at Apogee Instruments:
(thermistor for air temperature)
(probe for air temperature and humidity)
(PRT option for air temperature)
(probe for air temperature and humidity)
(probes for air temperature and humidity)
(probe for air temperature and humidity)
(probes for air temperature and humidity)
Fan-aspirated shield model and serial number are
printed on a white heat-shrink label located near
the pigtail leads on the fan cable. If you need the
manufacturing date of your sensor, please contact
Apogee Instruments with the serial number of your
sensor.
Temperature sensor model number and serial
number are located near the pigtail leads on the
sensor cable. If you need the manufacturing date
of your sensor, please contact Apogee Instruments
with the serial number of your sensor.