Dascom PRINTEC FormsPro 5100 Series Kurzanleitung zur Einrichtung - Seite 2

Blättern Sie online oder laden Sie pdf Kurzanleitung zur Einrichtung für Drucker Dascom PRINTEC FormsPro 5100 Series herunter. Dascom PRINTEC FormsPro 5100 Series 3 Seiten.
Auch für Dascom PRINTEC FormsPro 5100 Series: Kurzanleitung zur Einrichtung (3 seiten)

Seite drucken

Load Paper – Raise the front cover.

Remove the bottom cover A.

Open the right and left tractor flaps.

Make sure to align the paper stack in parallel with the printer and that the paper flow is

unobstructed.

Review the configuration settings described on the next page. When complete, press the "Online" button to allow the printer to receive data and begin printing.

All manuals and user guides at all-guides.com

Open the colored latch lever and align the tractor so

that the first printing position on the paper matches

the X mark on the printer housing.

Lock the colored lever again.

Place fanfold paper into the left-hand tractor.

Lower the front cover. Switch the printer on. The active paper source (Tractor 1)

appears in the display. The display alternates between...

And...

The paper is automatically loaded when the printer is in online mode and

receives data from the computer.

Note: For FormsPro 5102 printers, see additional included instruction Part

Number 7621 for paper loading.

Open the colored latch lever of the right-hand tractor

and align it to the paper width.

Insert the fanfold paper into the right-hand tractor.

Make sure that it is inserted by the same length as on

the left-hand tractor in or der to avoid any paper jam.

Close the tractor flap and lock the tractor by turning the

tractor lever to the rear.

CAUTION: Do not tension the paper excessively to

avoid tearing the perforation holes; do not allow

excessive slack since in this case the paper will bulge

and there may be problems in the feeding process.

Part Number 7697 Rev. B