Dash Cam Cyclops 4SK108 Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Dash Cameras Dash Cam Cyclops 4SK108 herunter. Dash Cam Cyclops 4SK108 9 Seiten.

1) Charging:

A) Using the built-in rechargeable lithium battery

Charging options: 1) Connect TODC CYCLOPS to the car charger; 2) Connect TODC CYCLOPS to

your computer using the USB cable

When charging through the car charger, the „battery‟ display in the bottom right of the screen

will flash – indicating that the unit is charging

A red light will illuminate on the left side of TODC CYCLOPS whenever the camera is charging

o (Note: For first charge a minimum of 6 hours is recommended)

B) TODC CYCLOPS connected to the 12v car charger

When the 12v car charger is plugged into your vehicle‟s 12v outlet and TODC CYCLOPS is connected;

after starting the vehicle, the device automatically turns on and enters video mode -- it will begin to

record. The device will continue recording while charging.** When the vehicle is turned off, the device

keeps working and will turn off five seconds later, saving the recorded files automatically (if your

vehicle‟s 12v outlet stays active when the car is turned off, it is recommended to unplug your TODC

CYCLOPS before leaving your car). Alternatively you can choose to turn the camera off using the power

button

; the files will be automatically saved.

** Note: TODC CYCLOPS is designed to be plugged in continually while driving; leaving the unit

plugged in for long periods of time will not harm the camera.

This camera has three modes: Video mode, Still Photo mode, Playback mode

To switch between modes, when the camera is NOT recording, press the MODE button

A) Video mode: (a video camcorder icon will display in the top left of the screen

must be inserted)

After pressing and holding the power button, or connecting TODC CYCLOPS to the car charger, the

camera turns on and enters video mode. TODC CYCLOPS will automatically begin recording. To stop

recording, press the OK button

you stop recording using the OK button or you simply power down TODC CYCLOPS using the power

button, your video will be stored.**

**Note: Pressing the OK button

**Note: Pressing the mode button

current video – the top of the screen will display this lock key icon

overwritten until the memory card is formatted.

**Note: A quick press (less than one second) of the power button

CYCLOPS from day mode to night mode (the following icon will display on the top of the display screen

when in night mode

. To turn off the device, press and hold the power button

in video mode starts and stops recording.

while TODC CYCLOPS is recording will lock and store the

. Memory card

. This video will not be

while recording changes TODC

. Whether