Apollo Enclosures AE7570 Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Gehege Apollo Enclosures AE7570 herunter. Apollo Enclosures AE7570 16 Seiten. Environmental tv enclosures (with tv swing brackets) mastering the outdoor tv viewing experience from the inside out

Seite drucken

Apollo Enclosures AE7570 Installationshandbuch

2. Attaching TV Swing Brackets to Back of TV (continued)_

NOTE: Apollo enclosure models 43" through 65" are designed for standard TV VESA pattern widths

of 300mm (approx..12 ") and 400mm (approx.. 16"). A few TVs may have a width of 200mm

(approx.. 8"). If your TV VESA pattern width is 200mm, an adapter kit will be required. Please

contact Apollo Enclosures at 888-414-5919 and one will be sent at No Charge.

a. Select the notch on the TV Swing Bracket based on the size of the TV (see Page 9)

b. Find the vertical center line of your TV by placing a tape measure vertically top to bottom on the

rear of the TV and mark the center of the TV with a pencil.

c. Line up holes on TV swing bracket with TV VESA holes so that the appropriate notch in bracket

lines up with center line of TV (as close as possible).

d. If the TV swing bracket, when properly lined up with the center line, does not cover the bottom TV

VESA holes, refer to chart on next page for "Lower VESA" patterns and realign bracket to center

line notch, as indicated.

Select the proper size metric screw that fits the TV VESA holes (included with the TV mount) and

screw brackets in place. Be sure to tighten screws down to fit securely. If screws are too long, use

washers between bracket and screw head.

IG1902 43-86 Swing A

Page 10