4DRC 4D -V32 Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drohnen 4DRC 4D -V32 herunter. 4DRC 4D -V32 16 Seiten. Four axis aircraft

13.2 One click return:

When the flight distance of the aircraft is too far, the return function can be used to

recall the aircraft. When turning on the frequency control, the remote control must be

facing the tail of the aircraft. During flight, long press and hold the return button

(Figure 6). The remote control emits a "beep" sound, and the aircraft enters a one

click return flight, automatically flying back to our side; When any joystick is activated,

the return function is deactivated.

13.3 Speed switching:

When the aircraft takes off, it defaults to low speed mode (3 gear switching). Gently

press the remote control to make one "beep" sound for low speed, two "beep" sounds

for medium speed, and three "beep" sounds for high speed (Figure 7).

13.4 Fine tuning mode:

When the aircraft leaves the ground and its orientation shifts, press and hold the

fine adjustment button for three seconds to enter the fine adjustment mode:

When the aircraft is offsetting towards the rear, gently push the right joystick ②

●

forward and down until the fine adjustment is completed;

When the aircraft is moving forward, push the right joystick ③ back slightly until the

●

fine adjustment is completed;

When the aircraft is offset to the right, gently push the right joystick ④ to the left until

●

the fine adjustment is completed;

When the aircraft is offset to the left, gently push the right joystick ⑤ to the right once

●

until the fine adjustment is completed;

After the fine adjustment is completed, briefly press the fine adjustment button to

release the fine adjustment mode.

Figure 6

Figure 7

-9-