Data Aire dap4 touch Benutzerhandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kontrolleinheit Data Aire dap4 touch herunter. Data Aire dap4 touch 8 Seiten. Modbus tcp/ip protocol integration
Auch für Data Aire dap4 touch: Schnellstart-Handbuch (9 seiten), Einbauanleitung (2 seiten), Protokoll-Handbuch (13 seiten)

Seite drucken

3. Navigating through screens

Note: If the touch display is too sensitive for the user's finger, use a stylist such as pen or pencil.

a) LCD Emulation and Programming Mode

Press and hold the Tool icon on the Home screen and wait for the monochrome LCD emulation mode to

load.

This mode is used to access menus to change settings such as alarm limits, deadbands, or unit configuration.

Please refer to the dap4 IOM for details on using this mode. Press arrow circle to exit the monochrome LCD

emulation mode and return to color graphic mode.

b) View System Information and setting the Target Address

On the home screen, press the lower right-side circle to display the System Information screen.

The dap4touch default Target Address is 1 because the dap4 controller's default address is 1. Only when

the Zone Master option is enabled does the target address need to be changed. Press the Target

Address to show the keypad and enter a new Target address. There will be a short delay before the dap4

Address matches the new Target Address as illustrated below. NOTICE: These two addresses must

always be the same or there is a communications error with the targeted dap4 controller.